HP StorageWorks 4/64 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 211
fcipChipTest, Synopsis, Description, Operands, Examples
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Note: Enter commands in lowercase only; mixed case is for readability. fcipChipTest 2 fcipChipTest Tests functionality of components in the FCIP complex. Synopsis fcipchiptest [--slot slotnumber][-testtype type][-unit number] Description Use this command to verify the internal registers and memory of the network processor, FCIP FPGA, compression processor, and GigPHY. Note This command is supported only on SilkWorm FR4-18i blades and SilkWorm 7500 platforms. Operands Examples This command has the following operands: --slot slotnumber Specifies the slot number on which the diagnostic operates. The default is 0 and operates on fixed-port-count products. -testtype type Specifies the test type to run. By default, the command runs all tests. Valid tests include: 0 All tests 1 Network processor SRAM test 2 FCIP FPGA internal register test 3 FCIP FPGA interrupt test 4 FCIP FPGA checksum test 5 Compression engine MBIST and LBIST -unit number Specifies the GbE port to test. By default, all GbE ports in the specified slotnumber are used. Valid number values include: 0 GbE port 0 1 GbE port 1 2 All GbE port To run all tests on slot 7 and GbE port 1: switch:admin> fcipchiptest --slot 7 -unit 1 -testtype 0 Running fcipchiptest Test Complete: fcipchiptest Pass 1 of 1 Duration 0 hr, 1 min & 15 sec (0:1:15:351). passed. Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-177