HP StorageWorks 4/64 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 727
sysShutdown, See Also, For the FR4-18i AP blade, to perform a system shutdown from the standby CP
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 727 highlights
Note: Enter commands in lowercase only; mixed case is for readability. sysShutdown 2 To perform a system shutdown from the active CP in a dual-CP platform: switch:admin> sysshutdown This command will shutdown the operating systems on your switch. You are required to power-cycle the switch in order to restore operation. Are you sure you want to shutdown the switch [y/n]? y This is the active Cp 2005/09/13-01:15:13, [FSSM-1003], 414,, WARNING, Silkworm48000, HA State out of sync HA is disabled Broadcast message from root (ttyS0) Tue Sep 13 01:15:14 2005... The system is going down for system halt NOW !! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signal Unmounting all filesystems. umount2: Device or resource busy umount: /tmp: device is busy The system is halted flushing ide devices: hda Power down. ppc440gx System Halted For the FR4-18i AP blade, to perform a system shutdown from the active CP: switch:admin> sysshutdown This command will shutdown the operating systems on your switch. You are required to power-cycle the switch in order to restore operation. Are you sure you want to shutdown the switch [y/n]? y This is the active Cp 2005/11/16-05:47:20, [FSSM-1003], 5641,, WARNING, Silkworm12000, HA State out of sync HA is disabled Stopping blade 2 Shutting down the blade.... Stopping blade 8 Shutting down the blade.... Broadcast message from root (ttyS0) Wed Nov 16 05:47:20 2005... The system is going down for system halt NOW !! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signal Unmounting all filesystems. umount2: Device or resource busy umount: /tmp: device is busy The system is halted flushing ide devices: hda Power down. ppc440gx System Halted For the FR4-18i AP blade, to perform a system shutdown from the standby CP: switch:admin> sysshutdown Shut down the whole system is not support from the standby CP For shut down the whole system please run the sysshutdown from the active CP See Also haDisable, switchShutdown Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-693