HP StorageWorks 4/64 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 333
iscsiCfg, Description, Operands, iSCSI virtual target parameters.
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 333 highlights
Note: Enter commands in lowercase only; mixed case is for readability. iscsiCfg 2 Description Use this command to configure all iSCSI entities (such as authentication (CHAP), discovery domains (DD), discovery domain sets (DDSet), iSCSI virtual targets (VT), and LUN maps). Common actions include --add, --delete, --modify, --show, --enable and --disable; however, not all actions are valid for all operands. Use --commit all to save all entity changes to nonvolatile memory. This triggers the propagation of changes to all iSCSI-enabled switches and blades in the fabric. Changes will not take effect until a --commit all command is issued. Note Make all necessary configuration changes before issuing --commit all. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: auth CHAP parameters. Actions on auth are: • --create auth -u username -s CHAP_secret [-h] Creates a CHAP entry with a CHAP secret of CHAP_secret for username. • --modify auth -u username -s CHAP_secret [-h] Modifies the secret associated with an existing user. • --delete auth -u username [-h ] Deletes the CHAP entry associated with username. • --clear auth [-h ] Deletes the entire authentication database. • --show auth [-u username ] [-h] Displays the username and status for the specified user. If username is not specified, all users in the database are displayed. tgt iSCSI virtual target parameters. Actions on tgt are: • --easycreate tgt [-w port_wwn] [-h ] Creates iSCSI targets with all available FC targets in one step. If port_wwn is specified, all LUNs of that target are imported into one virtual target. If no port_wwn is specified, all FC targets are imported into virtual targets. The names for the iSCSI targets are the target prefix followed by the port WWN. • --easycreate tgt -s [-h ] Shows the Node and Port WWNs which will be used for any easycrate operation from this switch. • --create tgt -t target_name [-h ] Creates a target entry with the specified target_name. The target_name needs to be in IQN format. • --modify tgt -t target_name -a auth_method [-h ] Associates the authentication method auth_method with the target. Valid values for auth_method are CHAP and none. If CHAP is specified, then either one-way or mutual CHAP is enforced, based on the login frame from the host. • --delete tgt -t target_name [-h ] Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-299