HP StorageWorks 4/64 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 633
setDbg, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 633 highlights
Note: Enter commands in lowercase only; mixed case is for readability. setDbg 2 setDbg Sets debug level of the specified module. Synopsis setdbg [module_name][level] Description Use this command to set the debug level of a specified module. Debug levels filter the display of debug messages to the serial console. By default, no debug messages are displayed. Note High debug level values can generate a large volume of messages, degrading the system response time. The set of supported modules and their current debug levels are displayed by the command dbgShow. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: module_name Specify the name of the module for which you want to view the debug and verbosity levels. Module names are case sensitive. This operand is optional; if omitted, this command displays the debug and verbose level for all modules. level Specify the debug level for the specified module (0 to 9). A 0 value (default) specifies that no messages are to display. Higher values cause more messages from that module to display. This operand is optional, if omitted, this command displays the current debug and verbose level of the specified module. To set debug level of module named NS to value 3: switch:admin> setdbg NS 3 switch:admin> dbgshow NS Module NS, debug level = 3, verbose level = 0 See Also dbgShow Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-599