HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch command line - Page 107
Modifying the SNMP configuration, Table 42 - fibre channel switch default ip
![]() |
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Modifying the SNMP configuration To modify the SNMP configuration, enter the set setup snmp command in an Admin session, as shown in the following example. See Table 42 for SNMP parameters descriptions. 8/20q FC Switch (admin) #> set setup snmp A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Trap Severity Options unknown, emergency, alert, critical, error, warning, notify, info, debug, mark SNMPEnabled (True / False) [True ] Contact (string, max=64 chars) [] Location (string, max=64 chars) [] Trap1Address (dot-notated IP Address) [10.20.71.15 ] Trap1Port (decimal value) [162 ] Trap1Severity (see allowed options above) [warning ] Trap1Version (1 / 2) [2 ] Trap1Enabled (True / False) [False ] Trap2Address (dot-notated IP Address) [0.0.0.0 ] Trap2Port (decimal value) [162 ] Trap2Severity (see allowed options above) [warning ] Trap2Version (1 / 2) [2 ] Trap2Enabled (True / False) [False ] Trap3Address (dot-notated IP Address) [0.0.0.0 ] Trap3Port (decimal value) [162 ] Trap3Severity (see allowed options above) [warning ] Trap3Version (1 / 2) [2 ] Trap3Enabled (True / False) [False ] Trap4Address (dot-notated IP Address) [0.0.0.0 ] Trap4Port (decimal value) [162 ] Trap4Severity (see allowed options above) [warning ] Trap4Version (1 / 2) [2 ] Trap4Enabled (True / False) [False ] Trap5Address (dot-notated IP Address) [0.0.0.0 ] Trap5Port (decimal value) [162 ] Trap5Severity (see allowed options above) [warning ] Trap5Version (1 / 2) [2 ] Trap5Enabled (True / False) [False ] ReadCommunity (string, max=32 chars) [public ] WriteCommunity (string, max=32 chars) [private ] TrapCommunity (string, max=32 chars) [public ] AuthFailureTrap (True / False) [False ] ProxyEnabled (True / False) [True ] Resetting the SNMP configuration To reset the SNMP configuration back to the factory defaults, enter the reset snmp command in an Admin session, as shown in the following example. See Table 19 for a listing of the SNMP configuration factory defaults. 8/20q FC Switch (admin) #> reset snmp 8/20q Fibre Channel Switch command line interface guide 107
![](/manual_guide/products/hewlettpackard-ak241a-hp-storageworks-820q-fibre-channel-switch-command-line-interface-guide-56977198-2008-f6c9aa2/107.png)