HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch command line - Page 186
NTPServerAddress
![]() |
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Table 43 System configuration settings (Continued) Parameter Description NTPServerAddress The IP address of the NTP server from which the NTP client acquires the time and date. The default is 10.0.0.254. EmbeddedGUIEnabled Enables (True) or disables (False) the QuickTools management application. Changing this parameter to False while QuickTools is running will terminate the application. The default is True. Examples The following is an example of the set setup system command: 8/20q FC Switch (admin) #> set setup system A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. EthNetworkDiscovery EthNetworkAddress EthNetworkMask EthGatewayAddress AdminTimeout InactivityTimeout LocalLogEnabled RemoteLogEnabled RemoteLogHostAddress NTPClientEnabled NTPServerAddress EmbeddedGUIEnabled See also show setup system, page 223 (1=Static, 2=Bootp, 3=Dhcp, 4=Rarp) (dot-notated IP Address) (dot-notated IP Address) (dot-notated IP Address) (dec value 0-1440 minutes, 0=never) (dec value 0-1440 minutes, 0=never) (True / False) (True / False) (dot-notated IP Address) (True / False) (dot-notated IP Address) (True / False) [Static ] [10.0.0.1 ] [255.255.255.0] [10.0.0.254 ] [30 ] [0 ] [True ] [False ] [10.0.0.254 ] [False ] [10.0.0.254 ] [True ] 186 Command reference
![](/manual_guide/products/hewlettpackard-ak241a-hp-storageworks-820q-fibre-channel-switch-command-line-interface-guide-56977198-2008-f6c9aa2/186.png)