HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch command line - Page 88
Configuring a RADIUS server on the switch
![]() |
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Configuring a RADIUS server on the switch To configure a RADIUS server on the switch, enter the set setup radius command, as shown in the following example. See Table 40 for a description of the RADIUS server configuration parameters. 8/20q FC Switch (admin) #> set setup radius A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the attributes for the server being processed, press 'q' or 'Q' and the ENTER key to do so. If you wish to terminate the configuration process completely, press 'qq' or 'QQ' and the ENTER key to so do. DeviceAuthOrder UserAuthOrder TotalServers (1=Local, 2=Radius, 3=RadiusLocal) [Local] (1=Local, 2=Radius, 3=RadiusLocal) [Local] (decimal value, 0-5) [1 ] Server: 1 ServerIPAddress (dot-notated IP Address) [10.20.11.8] ServerUDPPort (decimal value) [1812 ] DeviceAuthServer (True / False) [True ] UserAuthServer (True / False) [True ] AccountingServer (True / False) [False ] Timeout (decimal value, 10-30 secs) [10 ] Retries (decimal value, 1-3, 0=None) [0 ] SignPackets (True / False) [False ] Secret (1-63 characters, recommend 22 Do you want to save and activate this radius setup? (y/n): [n] 88 RADIUS server configuration
![](/manual_guide/products/hewlettpackard-ak241a-hp-storageworks-820q-fibre-channel-switch-command-line-interface-guide-56977198-2008-f6c9aa2/88.png)