HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch command line - Page 172
Table 33 Event display filter parameters, Table 34 Severity level monitoring parameters, Table 35
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Table 33 Event display filter parameters Parameter Critical Description Critical severity-level events. The critical level describes events that are generally disruptive to the administration or operation of the fabric, but require no action. Warn Warning severity-level events. The warning level describes events that are generally not disruptive to the administration or operation of the fabric, but are more important than the informative-level events. Info Informative severity-level events. The informative level describes routine events associated with a normal fabric. None Specifies no severity levels for display on the screen level [filter] Specifies the severity level given by [filter] to use in monitoring and logging events for the specified components or ports. Table 34 describes the severity level monitoring parameters. Table 34 Severity level monitoring parameters Parameter Critical Warn Info Description Monitors critical events. The critical level describes events that are generally disruptive to the administration or operation of the fabric, but require no action. This is the default severity level. Monitors warning and critical events. The warning level describes events that are generally not disruptive to the administration or operation of the fabric, but are more important than the informative level events. Monitors informative, warning, and critical events. The informative level describes routine events associated with a normal fabric. NOTE: Logging events at the Info severity level can deplete switch resources because of the high volume of events. None Monitors none of the severity levels port [port_list] Specifies one or more ports to monitor for events. Table 35 describes the port monitoring parameters. Table 35 Port monitoring parameters Parameter [port_list] All None Description Specifies the port or ports to monitor. [port_list] can be a set of port numbers and ranges delimited by spaces. For example, 0 2 10-15 specifies ports 0, 2, 10, 11, 12, 13, 14, and 15. Specifies all ports Disables monitoring on all ports 172 Command reference