HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch command line - Page 184
Parameter, Description, Examples, See also, AuthFailureTrap, False, ProxyEnabled, set setup snmp
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Table 42 SNMP configuration settings (Continued) Parameter Description AuthFailureTrap Enables (True) or disables (False) the generation of traps in response to trap authentication failures. The default is False. ProxyEnabled Enables (True) or disables (False) SNMP communication with other switches in the fabric. The default is True. Examples The following is an example of the set setup snmp command: 8/20q FC Switch (admin) #> set setup snmp A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Trap Severity Options unknown, emergency, alert, critical, error, warning, notify, info, debug, mark SNMPEnabled (True / False) [True ] Contact (string, max=64 chars) [] Location (string, max=64 chars) [] Trap1Address (dot-notated IP Address) [10.20.71.15 ] Trap1Port (decimal value) [162 ] Trap1Severity (see allowed options above) [warning ] Trap1Version (1 / 2) [2 ] Trap1Enabled (True / False) [False ] Trap2Address (dot-notated IP Address) [0.0.0.0 ] Trap2Port (decimal value) [162 ] Trap2Severity (see allowed options above) [warning ] Trap2Version (1 / 2) [2 ] Trap2Enabled (True / False) [False ] Trap3Address (dot-notated IP Address) [0.0.0.0 ] Trap3Port (decimal value) [162 ] Trap3Severity (see allowed options above) [warning ] Trap3Version (1 / 2) [2 ] Trap3Enabled (True / False) [False ] Trap4Address (dot-notated IP Address) [0.0.0.0 ] Trap4Port (decimal value) [162 ] Trap4Severity (see allowed options above) [warning ] Trap4Version (1 / 2) [2 ] Trap4Enabled (True / False) [False ] Trap5Address (dot-notated IP Address) [0.0.0.0 ] Trap5Port (decimal value) [162 ] Trap5Severity (see allowed options above) [warning ] Trap5Version (1 / 2) [2 ] Trap5Enabled (True / False) [False ] ReadCommunity (string, max=32 chars) [public ] WriteCommunity (string, max=32 chars) [private ] TrapCommunity (string, max=32 chars) [public ] AuthFailureTrap (True / False) [False ] ProxyEnabled (True / False) [True ] See also show setup snmp, page 222 184 Command reference