HP StorageWorks SN6000 HP StorageWorks 8/20q Fibre Channel Switch command line - Page 215
The following is an example of the, command, set setup radius server
![]() |
View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
The following is an example of the set setup radius server command: 8/20q FC Switch (admin) #> set setup radius server 1 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the attributes for the server being processed, press 'q' or 'Q' and the ENTER key to do so. If you wish to terminate the configuration process completely, press 'qq' or 'QQ' and the ENTER key to so do. PLEASE NOTE SSL must be enabled in order to configure RADIUS User Authentication SSL can be enabled using the 'set setup services' command. Server 1 Current Values: ServerIPAddress 10.20.11.8 ServerUDPPort 1812 DeviceAuthServer True UserAuthServer True AccountingServer False Timeout 10 Retries 0 SignPackets False Secret ********** New Server 1 Value (press ENTER to accept current value, 'q' to skip): ServerIPAddress (hostname, IPv4, or IPv6 address) : ServerUDPPort (decimal value) : DeviceAuthServer (True / False) : UserAuthServer (True / False) : AccountingServer (True / False) : Timeout (decimal value, 1-30 secs) : Retries (decimal value, 1-3, 0=None) : SignPackets (True / False) : Secret (1-63 characters, recommend 22+) : Do you want to save and activate this radius setup? (y/n): [n] See also show setup radius, page 263 8/20q Fibre Channel Switch command line interface guide 215
![](/manual_guide/products/hewlettpackard-ak241a-hp-storageworks-820q-fibre-channel-switch-command-line-interface-guide-56977517-2008-397a799/215.png)