HP StorageWorks SN6000 HP StorageWorks 8/20q Fibre Channel Switch command line - Page 265
show setup snmp, configuration parameters.
View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
show setup snmp Description Displays the current SNMP settings. Authority None Syntax show setup snmp common trap [trap_number] Operands common Displays SNMP configuration parameters that are common to all traps. To display common and trap-specific parameters, omit the operand. See Table 51 for descriptions of the common configuration parameters. trap Displays trap-specific SNMP configuration parameters. To display common and trap-specific parameters, omit the operand. See Table 52 for descriptions of the trap-specific configuration parameters. Examples The following is an example of the show setup snmp common command: 8/20q FC Switch #> show setup snmp common SNMP Information SNMPEnabled True Contact Location Description HP StorageWorks 8/20q FC Switch ObjectID 1.3.6.1.4.1.3873.1.11 AuthFailureTrap True ProxyEnabled True SNMPv3Enabled False The following is an example of the show setup snmp trap command: 8/20q FC Switch #> show setup snmp trap 1 SNMP Information Trap1Enabled False Trap1Address 10.0.0.254 Trap1Port 162 Trap1Severity warning Trap1Version 2 See also set setup snmp, page 219 8/20q Fibre Channel Switch command line interface guide 265