HP StorageWorks SN6000 HP StorageWorks 8/20q Fibre Channel Switch command line - Page 217
The 8/20q Fibre Channel Switch Call Home service, the Network Time Protocol NTP
View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Table 50 Switch services settings (continued) Parameter SNMPEnabled NTPEnabled CIMEnabled FTPEnabled MgmtServerEnabled CallHomeEnabled Description Enables (True) or disables (False) the management of the switch through third-party applications that use the Simple Network Management Protocol (SNMP). This parameter is the master control for the set setup snmp command parameter, SNMPEnabled. The default is True. Enables (True) or disables (False) the Network Time Protocol (NTP) which allows the synchronizing of switch and workstation dates and times with an NTP server. This helps to prevent invalid SSL certificates and timestamp confusion in the event log. The default is False. This parameter is the master control for the set setup system command parameter, NTPClientEnabled. The default is False. Enables (True) or disables (False) the management of the switch through third-party applications that use SMI-S. The default is True. Enables (True) or disables (False) FTP for transferring files rapidly between the workstation and the switch. The default is True. Enables (True) or disables (False) the management of the switch through third-party applications that use GS-3 Management Server (MS). This parameter is the master control for the set config port command parameter, MSEnable. The default is True. Enables (True) or disables (False) the Call Home service which controls e-mail notification. The default is True. NOTE: The 8/20q Fibre Channel Switch Call Home service provides an e-mail notification capability for the switch. This service has no relationship with the HP Call Home feature, which notifies HP services. 8/20q Fibre Channel Switch command line interface guide 217