HP StorageWorks SN6000 HP StorageWorks 8/20q Fibre Channel Switch command line - Page 99
RADIUS server configuration, Displaying RADIUS server information
View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
9 RADIUS server configuration Authentication can be performed locally using the switch's security database, or remotely using a Remote Dial-In User Service (RADIUS) server such as Microsoft RADIUS. With a RADIUS server, the security database for the entire fabric resides on the server. In this way, the security database can be managed centrally, rather than on each switch. However, when using a RADIUS server, every switch in the fabric must have a network connection. You can configure up to five RADIUS servers to provide failover. You can configure a RADIUS server to authenticate only the switch or both the switch and the initiator device, if the device supports authentication. A RADIUS server can also be configured to authenticate user accounts. See "User account configuration" on page 21. A secure connection is required to authenticate user logins with a RADIUS server. See "Connection security configuration" on page 85. This section describes the following tasks: • Displaying RADIUS server information, page 99 • Configuring a RADIUS server on the switch, page 100 Displaying RADIUS server information To display RADIUS server information, enter the show setup radius command, as shown in the following example. For information about RADIUS server configuration parameters, see Table 48. 8/20q FC Switch #> show setup radius Radius Information DeviceAuthOrder Local UserAuthOrder Local TotalServers 2 Server: 1 ServerIPAddress ServerUDPPort DeviceAuthServer UserAuthServer AccountingServer Timeout Retries SignPackets Secret 10.0.0.13 1812 False False False 2 0 False ******** Server: 2 ServerIPAddress ServerUDPPort DeviceAuthServer UserAuthServer AccountingServer Timeout Retries SignPackets Secret bacd:1234:bacd:1234:bacd:1234:bacd:1234 1812 True True True 2 0 False ******** 8/20q Fibre Channel Switch command line interface guide 99