HP StorageWorks SN6000 HP StorageWorks 8/20q Fibre Channel Switch command line - Page 256
show port, Table 64 Show port display entries, BBCR_FrameFailures
View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
show port Description Displays operational information for one or more ports. Authority None Syntax show port Table 64 describes the information returned by the show port command. Table 64 Show port display entries Parameter AdminState AIinit AIinitError AsicNumber AsicPort BadFrames BBCR_FrameFailures BBCR_RRDYFailures ClassXFramesIn ClassXFramesOut ClassXWordsIn ClassXWordsOut ClassXToss ConfigType DecodeError POSTFaultCode POSTStatus DownstreamISL EpConnects EpConnState EpIsoReason FBusy Description Administrative state Number of times the port begins arbitrated loop initialization Number of times the port entered initialization and the initialization failed Application-specific integrated circuit (ASIC) number ASIC port number Number of frames that have framing errors. Number of times more frames were lost during a credit recovery period than the recovery process could resolve. This causes a Link Reset to recover the credits. Number of times more Receiver_Ready (R_RDY) primitives were lost during a credit recovery period than the recovery process could resolve. This causes a Link Reset to recover the credits. Number of class x frames received by this port Number of class x frames sent by this port Number of class x words received by this port Number of class x words sent by this port Number of times an SOFi3 or SOFn3 frame is tossed Configured port type Number of decode errors detected Fault code from the most recent power-on self test Status from the most recent power-on self test Downstream ISL state. True indicates a connection to another switch that is not the principal switch. Number of times an E_Port connected through ISL negotiation E_Port connection status E_Port isolation reason Number of times the switch sent a fabric busy (F_BSY) frame because the Class 2 frame could not be delivered within ED_TOV time; or the number of class 2 and class 3 F_BSY frames generated by this port in response to incoming frames. This usually indicates a busy condition on the fabric or N_Port that is preventing delivery of this frame. 256 Command reference