HP StorageWorks SN6000 HP StorageWorks 8/20q Fibre Channel Switch command line - Page 225
Table 58 Timer configuration parameters, the maximum is
View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
Table 58 Timer configuration parameters Parameter AdminTimeout Description Amount of time in minutes the switch waits before terminating an idle Admin session. Zero (0) disables the time out threshold. The default is 30, the maximum is 1440. InactivityTimeout Amount of time in minutes the switch waits before terminating an idle Telnet command line interface session. Zero (0) disables the time out threshold. The default is 0, the maximum is 1440. Examples The following is an example of the set setup system dns command: 8/20q FC Switch (admin) #> set setup system dns A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Current Values: DNSClientEnabled DNSLocalHostname DNSServerDiscovery DNSServer1Address DNSServer2Address DNSServer3Address DNSSearchListDiscovery DNSSearchList1 DNSSearchList2 DNSSearchList3 DNSSearchList4 DNSSearchList5 False Static Static New Value (press ENTER to accept current value, 'q' to quit, 'n' for none): DNSClientEnabled (True / False) : DNSLocalHostname (hostname) : DNSServerDiscovery (1=Static, 2=Dhcp, 3=Dhcpv6) : DNSServer1Address (IPv4, or IPv6 Address) : DNSServer2Address (IPv4, or IPv6 Address) : DNSServer3Address (IPv4, or IPv6 Address) : DNSSearchListDiscovery (1=Static, 2=Dhcp, 3=Dhcpv6) : DNSSearchList1 (domain name) : DNSSearchList2 (domain name) : DNSSearchList3 (domain name) : DNSSearchList4 (domain name) : DNSSearchList5 (domain name) : Do you want to save and activate this system setup? (y/n): [n] 8/20q Fibre Channel Switch command line interface guide 225