HP StorageWorks SN6000 HP StorageWorks 8/20q Fibre Channel Switch command line - Page 216
set setup services, Table 50 Switch services settings
View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
set setup services Description Configures services on the switch. Authority Admin session Syntax set setup services This command prompts you in a line-by-line fashion to enable or disable switch services. Table 50 describes the switch service parameters. For each parameter, enter a new value or press Enter to accept the current value shown in brackets. IMPORTANT: Be mindful when disabling TelnetEnabled and GUIMgmtEnabled; it is possible to disable all Ethernet access to the switch. Table 50 Switch services settings Parameter TelnetEnabled SSHEnabled GUIMgmtEnabled SSLEnabled EmbeddedGUIEnabled Description Enables (True) or disables (False) the ability to manage the switch over a Telnet connection. Disabling this service is not recommended. The default is True. Enables (True) or disables (False) Secure Shell (SSH) connections to the switch. SSH secures the remote connection to the switch. To establish a secure remote connection, your workstation must use an SSH client. The default is False. Enables (True) or disables (False) out-of-band management of the switch with Simple SAN Connection Manager, SNMP, and SMI-S. If this service is disabled, the switch can only be managed inband or through the serial port. The default is True. Enables (True) or disables (False) secure SSL connections for management applications including Simple SAN Connection Manager, QuickTools and SMI-S. The default is False. • Simple SAN Connection Manager version 1.0 does not support the SSL service. If SSL is enabled, you will be unable to manage the switch using this version of Simple SAN Connection Manager. • This service must be enabled to authenticate users through a RADIUS server. • Enabling SSL automatically creates a security certificate on the switch. • To enable secure SSL connections, you must first synchronize the date and time on the switch and workstation. • To disable SSL when using a user authentication RADIUS server, the RADIUS server authentication order must be local. Enables (True) or disables (False) the QuickTools embedded switch management application. QuickTools enables you to point at a switch with an internet browser and manage the switch. This parameter is the master control for the set setup system command parameter, EmbeddedGUIEnabled. The default is True. 216 Command reference