HP XP20000/XP24000 HP StorageWorks XP Disk Array Configuration Guide (T5278-96 - Page 42
Installing and configuring the host, Loading the operating system and software, Installing and configuring the FCAs, Configuring NetWare client, Configuring NetWare ConsoleOne
View all HP XP20000/XP24000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Installing and configuring the host This section explains how to install and configure Fibre Channel adapters (FCAs) that connect the host to the disk array. Loading the operating system and software Follow the manufacturer's instructions to load the operating system and software onto the host. Load all OS patches and configuration utilities supported by HP and the FCA manufacturer. Installing and configuring the FCAs Install and configure the Fibre Channel adapters using the FCA manufacturer's instructions. Configuring NetWare client NetWare 6.x NetWare Client software is required for the client system. After installing the software on the NetWare server, follow these steps: 1. Open the Novell Client Configuration dialog and click the Advanced Settings tab. 2. Change the following parameters: Give up on Requests to Sas: 180 Net Status Busy Timeout: 90 Configuring NetWare ConsoleOne NetWare 6.x Novell NetWare v6.x requires a tool called ConsoleOne to work in a storage environment. ConsoleOne is a free Java utility used to manage network resources. Configure ConsoleOne as follows: 1. Ensure NetWare Client software is already installed. 2. Install ConsoleOne on the NetWare 6.x server. 3. From the NetWare Client, run ConsoleOne: z:public/mgmt/consoleOne/1.2/bin/ConsoleOne 4. Right-click the Server icon, and select Disk Management Devices. 5. Scroll left to the Media tab. 42 Novell NetWare