HP XP20000/XP24000 HP StorageWorks XP Disk Array Configuration Guide (T5278-96 - Page 48
Verifying client operations, Middleware configuration, Host failover, Multipath failover
![]() |
View all HP XP20000/XP24000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
NetWare 6.5 1. Enter NSSMU at the server console. 2. In the main menu, select Volumes. 3. Press Insert and enter a name for the new volume, then click Next. 4. Select the desired pool/device, enter the desired Volume Quota, then click Next. 5. Review and change volume attributes as necessary. 6. Select Create. Verifying client operations After configuring the Novell NetWare system, verify that NetWare clients can access the new volumes. To verify access: 1. Copy an existing file onto each new volume. 2. Verify that the file was copied successfully. Middleware configuration The disk array supports many industry-standard middleware products which provide host failover and logical volume management. Available host failover products for the Novell NetWare server operating system include the Novell High Availability Server (NHAS), SFT III software products, Novell Clustering Services, and Novell Multipath Support. Logical volume management functions are included in the Novell NetWare server operating system (for example, Installation Option NetWare Loadable Module, NWAdmin). Host failover The NHAS and SFT III software products provide hardware fault tolerance (that is, host failover capability) for the Novell NetWare environment. Novell Clustering Service provides fault tolerance by moving (failing over) server resources from one server to another. If you plan to use these products with the disk array, contact your HP service representative for the latest information about support and configuration requirements. For assistance with NHAS or SFT III operations, see the Novell user documentation, or contact Novell customer support. Multipath failover The XP disk arrays support NetWare multipath failover. If multiple FCAs are connected to the disk array with commonly-shared LUNs, you can configure path failover to recognize each new device path: 1. In the startup.cfg file, enter SET MULTI-PATH SUPPORT=ON LOAD SCSIHD.CDM AEN 2. If the line LOAD CPQSHD.CDM is present, it should be commented out. Example startup.cfg SET MULTI-PATH SUPPORT=ON LOAD ACPIDRV.PSM ######## End PSM Drivers ######## LOAD SCSIHD.CDM AEN #LOAD CPQSHD.CDM LOAD IDECD.CDM ######## End CDM Drivers ######## LOAD IDEATA.HAM SLOT=10011 LOAD CPQRAID.HAM SLOT=10019 LOAD QL2300.HAM SLOT=2 /LUNS /ALLPATHS /PORTNAMES/CONSOLE 48 Novell NetWare
![](/manual_guide/products/hewlettpackard-xp20000xp24000-hp-storageworks-xp-disk-array-configuration-guide-t527896047-2011-474aa25/48.png)