HP Xw460c HP ProLiant xw460c Workstation Blade: Maintenance and Service Guide - Page 10
Removal and replacement procedures
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Removal and replacement procedures HP Confidential Required tools You need the following items for some procedures: • T-15 Torx screwdriver (provided inside the access panel) • HP Insight Diagnostics software ("HP Insight Diagnostics" on page 50) Safety considerations Before performing service procedures, review all the safety information. Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. To prevent electrostatic damage: • Avoid hand contact by transporting and storing products in static-safe containers. • Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations. • Place parts on a grounded surface before removing them from their containers. • Avoid touching pins, leads, or circuitry. • Always be properly grounded when touching a static-sensitive component or assembly. Workstation blade warnings and cautions WARNING: To reduce the risk of shock or injury from high-current electrical energy, do not remove the workstation blade access panel and then install the workstation blade into the enclosure. WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them. CAUTION: Do not operate the workstation blade with the access panel removed. Operating the workstation blade in this manner results in improper airflow and improper cooling that can lead to thermal damage. Removal and replacement procedures 10