HP Xw460c HP ProLiant xw460c Workstation Blade: Maintenance and Service Guide - Page 46
Power board
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
HP Confidential Power board To remove the power board: 1. Remove the access panel ("Access panel" on page 39). 2. Remove the PCIe card cage ("PCIe card cage" on page 40). 3. Disconnect the power cable from the power board and remove the cable (1). 4. Disconnect the thermal sensor cable from the power board (2). 5. Remove the four Torx-15 screws that secure the power board to the expansion blade enclosure (3). 6. Lift the power board out of the expansion blade enclosure (4). Removal and replacement procedures 46
HP Confidential
Removal and replacement procedures
46
Power board
To remove the power board:
1.
Remove the access panel ("Access panel" on page 39).
2.
Remove the PCIe card cage ("PCIe card cage" on page 40).
3.
Disconnect the power cable from the power board and remove the cable (1).
4.
Disconnect the thermal sensor cable from the power board (2).
5.
Remove the four Torx-15 screws that secure the power board to the expansion blade enclosure (3).
6.
Lift the power board out of the expansion blade enclosure (4).