HP Xw460c HP ProLiant xw460c Workstation Blade: Maintenance and Service Guide - Page 49
Connect the two short PCIe/SAS cables to the upper mezzanine connector board.
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
HP Confidential 4. Ensure that the plastic air baffle on the expansion blade enclosure is pushed toward the front of the enclosure. 5. Connect the two long PCIe/SAS cables to the lower mezzanine connector board. 6. Connect the two short PCIe/SAS cables to the upper mezzanine connector board. Removal and replacement procedures 49
HP Confidential
Removal and replacement procedures
49
4.
Ensure that the plastic air baffle on the expansion blade enclosure is pushed toward the front of the
enclosure.
5.
Connect the two long PCIe/SAS cables to the lower mezzanine connector board.
6.
Connect the two short PCIe/SAS cables to the upper mezzanine connector board.