HP Xw460c HP ProLiant xw460c Workstation Blade: Maintenance and Service Guide - Page 44
PCIe riser board
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
HP Confidential PCIe riser board To remove the PCIe riser board: 1. Remove the access panel ("Access panel" on page 39). 2. Remove the PCIe card cage ("PCIe card cage" on page 40). 3. Remove the graphics board ("Graphics board" on page 44). 4. Remove the three Torx-15 screws that secure the riser board to the PCIe card cage. 5. Slide the board back to disengage it from the anchoring pins on the PCIe card cage. 6. Remove the riser board from the card cage. When replacing the riser board, be sure to align the keyholes on the riser board with the anchoring pins on the PCIe card cage. Removal and replacement procedures 44
HP Confidential
Removal and replacement procedures
44
PCIe riser board
To remove the PCIe riser board:
1.
Remove the access panel ("Access panel" on page 39).
2.
Remove the PCIe card cage ("PCIe card cage" on page 40).
3.
Remove the graphics board ("Graphics board" on page 44).
4.
Remove the three Torx-15 screws that secure the riser board to the PCIe card cage.
5.
Slide the board back to disengage it from the anchoring pins on the PCIe card cage.
6.
Remove the riser board from the card cage.
When replacing the riser board, be sure to align the keyholes on the riser board with the anchoring pins
on the PCIe card cage.