HP Xw460c HP ProLiant xw460c Workstation Blade: Maintenance and Service Guide - Page 36

Install the heatsink

Get HP Xw460c - ProLiant - Blade Workstation PDF manuals and user guides View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

5. Close the processor retaining latch and the processor socket retaining bracket. HP Confidential 6. Clean the old thermal grease from the heatsink and the top of the processor with the alcohol swab. Allow the alcohol to evaporate before continuing. 7. Apply all the grease to the top of the processor in one of the following patterns to ensure even distribution: 8. Install the heatsink ("Heatsink" on page 25). IMPORTANT: Install all components with the same configuration that was used on the failed system board. 9. Install all components removed from the failed system board. 10. Install the hard drives ("Hard drive" on page 14). 11. Install the hard drive blanks ("Hard drive blank" on page 14). 12. Install the access panel ("Access panel" on page 13). 13. Power up the workstation blade. Removal and replacement procedures 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
HP Confidential
Removal and replacement procedures
36
5.
Close the processor retaining latch and the processor socket retaining bracket.
6.
Clean the old thermal grease from the heatsink and the top of the processor with the alcohol swab.
Allow the alcohol to evaporate before continuing.
7.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution:
8.
Install the heatsink ("
Heatsink
" on page
25
).
IMPORTANT:
Install all components with the same configuration that was used on the failed
system board.
9.
Install all components removed from the failed system board.
10.
Install the hard drives ("
Hard drive
" on page
14
).
11.
Install the hard drive blanks ("
Hard drive blank
" on page
14
).
12.
Install the access panel ("
Access panel
" on page
13
).
13.
Power up the workstation blade.