HP Xw460c HP ProLiant xw460c Workstation Blade: Maintenance and Service Guide - Page 47
Mezzanine connector board
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
HP Confidential Mezzanine connector board To remove the mezzanine connector board: NOTE: There are two mezzanine connector boards in the workstation blade. The replacement procedure is the same for each board. 1. Remove the access panel ("Access panel" on page 39). 2. Remove the PCIe card cage ("PCIe card cage" on page 40). 3. Remove the four PCIe/SAS cables from the mezzanine connector boards. 4. Slide the expansion blade enclosure back and then lift it off of the workstation blade. Removal and replacement procedures 47
HP Confidential
Removal and replacement procedures
47
Mezzanine connector board
To remove the mezzanine connector board:
NOTE:
There are two mezzanine connector boards in the workstation blade. The replacement procedure
is the same for each board.
1.
Remove the access panel ("Access panel" on page 39).
2.
Remove the PCIe card cage ("PCIe card cage" on page 40).
3.
Remove the four PCIe/SAS cables from the mezzanine connector boards.
4.
Slide the expansion blade enclosure back and then lift it off of the workstation blade.