HP Z840 Maintenance and Service Guide - Page 105
Screen message, Probable cause, Recommended action, Front USB Not Connected
View all HP Z840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Screen message Probable cause Recommended action 518-PCI fan not detected PCI fan missing, disconnected, or defective. 1. Reseat the fan cable. 2. Reseat the fan. 3. Replace the fan. 519-Hard drive fan not detected Hard drive fan missing, disconnected, or 1. Reseat the fan cable. defective. 2. Reseat the fan. 3. Replace the fan. 520-Memory fan (2) not detected Memory fan (2) missing, disconnected, or defective. 1. Reseat the fan cable. 2. Reseat the fan. 3. Replace the fan. 521-Memory fan (3) not detected Memory fan(3) missing, disconnected, or 1. defective. 2. 3. Reseat the fan cable. Reseat the fan. Replace the fan. 522-Memory fan (4) not detected Memory fan(4) missing, disconnected, or 1. defective. 2. 3. Reseat the fan cable. Reseat the fan. Replace the fan. 523-CPU fan (2) not detected Processor fan(2) missing, disconnected, 1. Reseat the fan cable. or defective. 2. Reseat the fan. 3. Replace the fan. 524-Rear chassis fan(2) not detected Rear chassis fan(2) missing, disconnected, or defective. 1. Reseat the fan cable. 2. Reseat the fan. 3. Replace the fan. 525-Front chassis fan(2) not detected Front chassis fan(2) missing, disconnected, or defective. 1. Reseat the fan cable. 2. Reseat the fan. 3. Replace the fan. 526-CPU Liquid Cooling pump Liquid cooling pump on CPU1 is not not detected detected. 1. Reseat the pump cable. 2. Replace the pump. 527-CPU Liquid Cooling pump Liquid cooling pump on CPU2 is not (2) not detected detected. 1. Reseat the pump cable. 2. Replace the pump. 529-Unsupported WiFi Device(s) Detected An unsupported WiFi device has been installed into an internal slot. Remove the unsupported device. 917-Front Audio Not Connected Front Audio mechanism is missing or is not connected. 1. Replace or reconnect the missing front audio mechanism to the system board. 2. Reseat or replace the missing mechanism cable. 918-Front USB Not Connected Front USB mechanism is missing or is not 1. connected. 2. Replace or reconnect the missing Front USB mechanism to the system board. Reseat or replace the missing mechanism cable. 921-Front USB Not Connected Front USB mechanism is missing or is not 1. Replace or reconnect the missing Front USB connected. mechanism to the system board. Diagnostic codes and errors 95