HP Z840 Maintenance and Service Guide - Page 73
HP Z640 Workstations — LSI 9217-4i4e RAID controller guidelines
View all HP Z840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
HP Z640 Workstations - LSI 9217-4i4e RAID controller guidelines See HP Z640 Workstation system board components on page 11to determine the location of system board connectors. NOTE: Hard drives attached to RC J8 are designated by the 9217-4i4e BIOS to be boot devices. If the hard drive connected to RC J8 is a member of a RAID array, the RAID array is the boot device. System board connector Drive installation scenarios 1 2 3 RC - Port 0 SAS HDD 1 SAS HDD 1-B SATA HDD 1-B RC - Port 1 SAS HDD 2 SATA HDD 2-D SAS HDD 2-D RC - Port 2 SAS HDD 3 SATA HDD 3-D SAS HDD 3-D RC - Port 3 SAS HDD 4 SATA HDD 4-D SAS HDD 4-D SATA 0 ODD 1 ODD 1 ODD 1 SATA 1 ODD 2 ODD 2 ODD 2 sSATA 0 - - - sSATA 1 - - - sSATA 02 eSATA (top) eSATA (top) eSATA (top) sSATA 3 eSATA (bottom) eSATA (bottom) eSATA (bottom) eSATA = external SATA (2 ports per cable assembly) HDD = hard drive ODD = optical drive NOTE: If there are fewer than three hard drives in the configuration, the cables from HDD bays 1 and 2 are preplugged to the RAID card adapter ports. NOTE: Only the most common configurations are shown here. Component replacement guidelines 63