HP Z840 Maintenance and Service Guide - Page 71
HP Z440 Workstations — LSI 9217-4i4e RAID controller guidelines
View all HP Z840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
HP Z440 Workstations - LSI 9217-4i4e RAID controller guidelines See HP Z440 Workstation system board components on page 5 to determine the location of system board connectors. NOTE: Hard drives attached to RC J8 are designated by the 9217-4i4e BIOS to be boot devices. If the hard drive connected to RC J8 is a member of a RAID array, the RAID array is the boot device. System board connector Drive installation scenarios 1 2 3 RC - Port 0 SAS HDD1 SAS HDD1-B SAS HDD1-B RC - Port 1 SAS HDD2 SAS HDD2-D SAS HDD2-D RC - Port 2 SAS HDD3 SAS HDD3-D SAS HDD3-D RC - Port 3 SAS HDD4 SAS HDD4-D SAS HDD4-D SATA 0 ODD 1 ODD 1 ODD 1 SATA 1 ODD 2 ODD 2 ODD 2 sSATA 0 - - - sSATA 1 - - - sSATA 2 eSATA (top) SATA (top) SATA (top) sSATA 3 SATA (bottom) SATA (bottom) SATA (bottom) eSATA = external SATA (2 ports per cable assembly) If eSATA is installed, the ODD is attached to sSATA 3. If 4 SATA HDDs are installed on sSATA and eSATA is installed, there will be no ODD. HDD = hard drive ODD = optical drive NOTE: Only the most common configurations are shown here. Component replacement guidelines 61