HP ep9012 HP ep9010 Series Instant Cinema Digital Projector - User's Guide - Page 29
Turning the projector on and off
View all HP ep9012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Turning the projector on and off Setting up Turning the projector on 1. Be sure the power cord is connected. 2. Open the lens by sliding the lens cover 1 to the left. 3. Press the power button 2 on the projector or on the remote control. The projector takes a minute or so to warm up. The power button blinks during warm-up. ✎ It is normal for parts of the projector and the air coming out of the projector to be very warm. If the projector starts to overheat, the temperature warning light will turn on and the projector will shut down. User's Guide 29
Setting up
User’s Guide
29
Turning the projector on and off
Turning the projector on
1.
Be sure the power cord is connected.
2.
Open the lens by sliding the lens cover
1
to the left.
3.
Press the power button
2
on the projector or on the remote control.
The projector takes a minute or so to warm up. The power button blinks
during warm-up.
✎
It is normal for parts of the projector and the air coming out of the projector
to be very warm. If the projector starts to overheat, the temperature warning
light will turn on and the projector will shut down.