HP nx9000 Reference Guide - Page 65

To dock to the port replicator, When the notebook is docked

Page 65 highlights

Add-On Devices Connecting External Devices To dock to the port replicator 1. Plug in the AC adapter, then connect it to the back of the port replicator. You can also operate the port replicator using power from the notebook battery. 2. Remove the rubber cover from the docking connector on the bottom of the notebook. 3. Align the notebook with the locator posts on the port replicator. Note 4. Press the notebook down until both sides snap into place. 5. If the notebook is off, open it and press the power button to turn it on. The lights on the port replicator turn on. When the notebook is docked, you can use its security connector to secure it. To secure both the notebook and port replicator, install the cable lock in the security connector next to the undock button. This will also lock the undock button. If a device is connected to an audio port on the notebook, any device connected to the corresponding port on the port replicator is ignored. 56 Reference Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121

Add-On Devices
Connecting External Devices
56
Reference Guide
To dock to the port replicator
1.
Plug in the AC adapter, then connect it to the back of the port replicator. You can
also operate the port replicator using power from the notebook battery.
2.
Remove the rubber cover from the docking connector on the bottom of the
notebook.
3.
Align the notebook with the locator posts on the port replicator.
4.
Press the notebook down until both sides snap into place.
5.
If the notebook is off, open it and press the power button to turn it on. The lights
on the port replicator turn on.
When the notebook is docked, you can use its security connector to secure it. To
secure both the notebook and port replicator, install the cable lock in the security
connector next to the undock button. This will also lock the undock button.
Note
If a device is connected to an audio port on the notebook, any device connected to
the corresponding port on the port replicator is ignored.