HP xw3400 HP xw3400 Workstation - Hardware Reference Guide - Page 23
Before removing an installed expansion card, disconnect any cables that may be attached
View all HP xw3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
7. On the rear of the workstation, a sliding slot cover lock secures the expansion card brackets and expansion slot covers in place. Loosen the captive thumbscrew that holds the slot cover lock in place (1) and slide the slot cover lock up and off the chassis (2). Figure 2-8 Releasing the slot cover lock 8. Before installing an expansion card, remove either the expansion slot cover or the existing expansion card. NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card. a. If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside of the chassis. Figure 2-9 Removing an expansion slot cover ENWW Removing or installing an expansion card 17