HP xw3400 HP xw3400 Workstation - Hardware Reference Guide - Page 34

Replace the front bezel and workstation access panel.

Get HP xw3400 - Workstation PDF manuals and user guides View all HP xw3400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

5. If necessary, remove the appropriate drive bezel blank from the front bezel by pressing the two retaining tabs towards the outer left edge of the bezel (1) and pull the bezel blank inwards to remove it (2). Figure 2-24 Removing bezel blanks 6. Replace the removed drive bezel with the appropriate bezel by pushing the bezel into place. NOTE: The type of bezel you need will depend on the type of drive you plan to install. 7. Replace the front bezel and workstation access panel. 8. Reconnect the power cord and any external devices, then turn on the workstation. 9. Lock any security devices that were disengaged when the access panel was removed. 28 Chapter 2 Hardware upgrades ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
5
.
If necessary, remove the appropriate drive bezel blank from the front bezel by pressing the two
retaining tabs towards the outer left edge of the bezel (1) and pull the bezel blank inwards to remove
it (2).
Figure
2
-
24
Removing bezel blanks
6
.
Replace the removed drive bezel with the appropriate bezel by pushing the bezel into place.
NOTE:
The type of bezel you need will depend on the type of drive you plan to install.
7
.
Replace the front bezel and workstation access panel.
8
.
Reconnect the power cord and any external devices, then turn on the workstation.
9
.
Lock any security devices that were disengaged when the access panel was removed.
28
Chapter
2
Hardware upgrades
ENWW