HP xw3400 HP xw3400 Workstation - Hardware Reference Guide - Page 31
Remove the four guide screws two on each side from the old drive. You will need these screws
View all HP xw3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
b. If you are removing a diskette drive, disconnect the data cable (1) and power cable (2) from the back of the drive. Figure 2-18 Disconnecting the diskette drive cables 7. A latch drive bracket with release tabs secures the drives in the drive bay. Lift the release tab on the latch drive bracket (1) for the drive you want to remove, then slide the drive from its drive bay (2). Figure 2-19 Removing the external drives 8. Remove the four guide screws (two on each side) from the old drive. You will need these screws to install a new drive. ENWW Installing additional drives 25
b
.
If you are removing a diskette drive, disconnect the data cable (1) and power cable (2) from
the back of the drive.
Figure
2
-
18
Disconnecting the diskette drive cables
7
.
A latch drive bracket with release tabs secures the drives in the drive bay. Lift the release tab on the
latch drive bracket (1) for the drive you want to remove, then slide the drive from its drive bay (2).
Figure
2
-
19
Removing the external drives
8
.
Remove the four guide screws (two on each side) from the old drive. You will need these screws to
install a new drive.
ENWW
Installing additional drives
25