HP xw3400 HP xw3400 Workstation - Hardware Reference Guide - Page 27
Drive positions
View all HP xw3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
12. While holding the expansion card bracket against the chassis, slide the slot cover lock down toward the expansion card brackets and slot covers (1) to secure them in place then replace the thumbscrew (2) that secures the slot cover lock. Figure 2-15 Securing the expansion cards and slot covers 13. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. 14. Replace the workstation access panel. 15. Reconnect the power cord and any external devices, then turn on the workstation. 16. Lock any security devices that were disengaged when the access panel was removed. 17. Reconfigure the workstation, if necessary. Refer to the Service and Technical Reference Guide on the Documentation and Diagnostics CD for instructions about using Computer Setup. Drive positions Figure 2-16 Drive positions ENWW Drive positions 21