HP xw3400 HP xw3400 Workstation - Hardware Reference Guide - Page 26

When installing an expansion card, press firmly on the card so that the whole connector

Get HP xw3400 - Workstation PDF manuals and user guides View all HP xw3400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

9. Store the removed card in anti-static packaging. 10. If you are not installing a new expansion card, install an expansion slot cover to close the open slot. CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation. 11. To install an expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis (1) so that the bracket on the card is aligned with the open slot on the rear of the chassis. Press the card straight down into the expansion socket on the system board (2). Figure 2-14 Installing an expansion card NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot. NOTE: When replacing or reinstalling a PCI Express x16 graphics card, reinstall the appropriate graphics card hold-down bracket and screws before proceeding to the next step. 20 Chapter 2 Hardware upgrades ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
9
.
Store the removed card in anti-static packaging.
10
.
If you are not installing a new expansion card, install an expansion slot cover to close the open slot.
CAUTION:
After removing an expansion card, you must replace it with a new card or expansion
slot cover for proper cooling of internal components during operation.
11
.
To install an expansion card, hold the card just above the expansion socket on the system board
then move the card toward the rear of the chassis (1) so that the bracket on the card is aligned with
the open slot on the rear of the chassis. Press the card straight down into the expansion socket on
the system board (2).
Figure
2
-
14
Installing an expansion card
NOTE:
When installing an expansion card, press firmly on the card so that the whole connector
seats properly in the expansion card slot.
NOTE:
When replacing or reinstalling a PCI Express x16 graphics card, reinstall the appropriate
graphics card hold-down bracket and screws before proceeding to the next step.
20
Chapter
2
Hardware upgrades
ENWW