IBM 2658 Hardware Maintenance Manual - Page 48
Drive A: or B: is, Diskette drive
UPC - 087944841135
View all IBM 2658 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Error Code 0270 Message Real time clock error Meanings Comment or Action Real-Time Clock fails BIOS hardware test. May require board repair. 1. Replace the backup battery and run IBM BIOS Setup Utility to reset the time and date. 0271 0280 0281 02B0 2. System Board Check date and time settings BIOS found date or time out of range and reset the Real-Time Clock. May require setting legal date (1991-2099). Run IBM BIOS Setup Utility to reset the time and date. Previous boot incomplete-Default configuration used Previous POST did not complete successfully. POST loads default values and offers to run Setup. If the failure was caused by incorrect values and they are not corrected, the next boot will likely fail. On system with control of wait states, improper Setup settings can also teminate POST and cause this error on the next boot. Run Setup and verify that wait-state configuration is correct. This error is cleared the next time the system is booted. IBM customized not to display this message. Memory Size found by POST differed from CMOS Memory size found by POST differed from CMOS. Load ″Setup Default″ in IBM BIOS Setup Utility. Diskette drive A error Diskette drive B error Drive A: or B: is present but fails the BIOS POST diskette tests. CHeck to see that the drive is defined with the proper diskette type in Setup and that the diskette drive is attached corretly. Load ″Setup Default″ in IBM BIOS Setup Utility. 42 ThinkPad R32 Series