IBM 8488 Hardware Maintenance Manual - Page 115
ServeRAID, Hardware, Maintenance, Manual
UPC - 000435695277
View all IBM 8488 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Error code/symptom FRU/action 001-250-000 (Failed system board ECC) v System board 001-250-001 (Failed Processor Board ECC) v System board 001-292-000 (Core system: failed/CMOS checksum failed) v Load BIOS code defaults and rerun test. 005-XXX-000 (Failed Video test) 1. Video adapter 2. System board 011-XXX-000 (Failed COM1 Serial Port test) 1. Check loopback plug connected to externalized serial port. 2. System board. 011-XXX-001 (Failed COM2 Serial Port test) 1. Check loopback plug connected to externalized serial port. 2. Check cable from externalized port to system board. Should connect to serial port B on the system board (JCOM1). 3. System board. 014-XXX-000 (Failed Parallel Port test) v System board 015-XXX-001 (USB interface not found, board damaged) v System board 015-XXX-198 (Remote Supervisor Adapter II installed) or (USB device connected during USB test) 1. If Remote Supervisor Adapter II is installed as an option, remove it and rerun test. Note: If Remote Supervisor Adapter II is present as a standard installation, do not remove it; the test cannot be run. 2. Remove USB devices and rerun test. 3. System board . 020-XXX-000 (Failed PCI Interface test) v System board 030-XXX-000 (Failed Internal SCSI interface test) v System board 035-XXX-099 (No adapters were found) v If an adapter is installed re-check the connection. 035-XXX-S99 (Failed RAID test on PCI slot 1. RAID adapter S, check System Error Log before replacing a FRU) 2. SCSI backplane 3. Cable 035-XXX-SNN (Check System Error Log before replacing a FRU, NN = SCSI ID of failing fixed disk) v Hard disk with SCSI ID NN on RAID adapter in PCI slot S. 035-253-S99 (RAID adapter initialization failure) 1. ServeRAID Adapter in slot S is not configured properly. Obtain the basic and extended configuration status and see the ServeRAID Hardware Maintenance Manual for more information. 2. Cable. 3. SCSI backplane. 4. Adapter. 089-XXX-001 (Failed Microprocessor test) 1. Microprocessor 1 2. System board 089-XXX-002 (Failed Optional Microprocessor test) 1. Microprocessor 2 2. System board Chapter 6. Symptom-to-FRU index 105