IBM 8646 Hardware Maintenance Manual - Page 102

No beep symptoms, Diagnostic error codes, do

Get IBM 8646 - Eserver xSeries 220 PDF manuals and user guides View all IBM 8646 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 102 highlights

Beep/Symptom One Long and Two Short Beeps Two Long and Two Short Beeps FRU/Action 1. Video adapter (if present) 2. System Board 1. Video adapter No beep symptoms No Beep Symptom No beep and the system operates correctly. No Beeps occur after successfully completing POST No ac power No beep and no video FRU/Action 1. System board 1. System board 1. Check the power cord. 2. Power supply. 1. See "Undetermined problems" on page 105 Diagnostic error codes Note: In the following error codes, if XXX is 000, 195, or 197do not replace a FRU. The description for these error codes are: 000 The test passed. 195 The Esc key was pressed to abort the test. 197 This is a warning error and may not indicate a hardware failure. For all error codes, replace/follow the FRU/Action indicated. Error Code/Symptom 001-XXX-000 (Failed core tests) 001-XXX-001 (Failed core tests) 001-250-000 (Failed System Board ECC) 001-250-001 (Failed System Board ECC) 005-XXX-000 (Failed Video test) 011-XXX-000 (Failed COM1 Serial Port test) 011-XXX-001 (Failed COM2 Serial Port test) 014-XXX-000 (Failed Parallel Port test) FRU/Action 1. System Board 1. System Board 1. System Board 1. System Board 1. Video Adapter (if installed) 2. System Board 1. System Board 1. System Board 1. System Board 94 Hardware Maintenance Manual: xSeries 220 Type 8646

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
Beep/Symptom
FRU/Action
One Long and Two
Short Beeps
1.
Video adapter (if present)
2.
System Board
Two Long and Two
Short Beeps
1.
Video adapter
No beep symptoms
No Beep Symptom
FRU/Action
No beep and the system
operates correctly.
1.
System board
No Beeps occur after
successfully completing
POST
1.
System board
No ac power
1.
Check the power cord.
2.
Power supply.
No beep and no video
1.
See
“
Undetermined problems
”
on page 105
Diagnostic error codes
Note:
In the following error codes, if
XXX
is
000
,
195
, or
197
do not
replace a FRU.
The description for these error codes are:
000
The test passed.
195
The
Esc
key was pressed to abort the test.
197
This is a warning error and may not indicate a hardware failure.
For all error codes, replace/follow the FRU/Action indicated.
Error Code/Symptom
FRU/Action
001-XXX-000
(Failed core
tests)
1.
System Board
001-XXX-001
(Failed core
tests)
1.
System Board
001-250-000
(Failed System
Board ECC)
1.
System Board
001-250-001
(Failed System
Board ECC)
1.
System Board
005-XXX-000
(Failed Video
test)
1.
Video Adapter (if installed)
2.
System Board
011-XXX-000
(Failed COM1
Serial Port test)
1.
System Board
011-XXX-001
(Failed COM2
Serial Port test)
1.
System Board
014-XXX-000
(Failed Parallel
Port test)
1.
System Board
94
Hardware Maintenance Manual: xSeries 220 Type 8646