IBM 8646 Hardware Maintenance Manual - Page 46
Press Ctrl+S to enter the setup menu, Setup time wait menu, Legacy OS wake up support, or Windows NT.
![]() |
View all IBM 8646 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Select this choice to either display the PXE setup prompt or disable it. Disable is the default setting. When this choice is enabled, Press Ctrl+S to enter the setup menu will appear on the screen under the initializing prompt. v Setup time wait menu Select this choice to set the amount of time (in seconds) that the system will pause during initialization for a Ctrl+S input. - 2 seconds (Default) - 3 seconds - 5 seconds - 8 seconds v Legacy OS wake up support Select this choice to enable or disable the operating system wake up support. - Disabled (Default) - Enabled Note: 1. Use the default setting for the Advanced Configuration and Power Interface (ACPI) aware operating systems, such as Microsoft Windows 2000 or Windows NT. 2. If your server is running a non-ACPI operating system, you must set the selection to Enable to use the Wake on LAN support. 3. When using a non-ACPI operating system, do not send a wake up packet to the server while it is turned on. If a wake up packet has been sent while the server is on, you must turn off the server. 38 Hardware Maintenance Manual: xSeries 220 Type 8646
![](/manual_guide/products/ibm-8646-hardware-maintenance-manual-6b02ba6/46.png)