IBM 8646 Hardware Maintenance Manual - Page 111
Update BIOS, Pointing Device - boot ide
![]() |
View all IBM 8646 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Error Code/Symptom FRU/Action 1962 (Drive does not contain a valid boot sector) 1. Verify a bootable operating system is installed. 2. If RAID system, refer to the Hardware Maintenance Manual for the specific RAID adapter. 3. Run Diagnostics 4. Hard Disk Drive 5. Cable 6. SCSI Backplane 7. System Board 2400 (Video controller test failure) 1. Video Adapter (if installed) 2. System Board 2462 (Video memory configuration error) 1. Video Adapter (if installed) 2. System Board 5962 (IDE CD-ROM configuration error) 1. Run Configuration/Setup 2. CD-ROM Drive 3. CD-ROM Power Cable 4. IDE Cable 5. System Board 6. Battery 8603 (Pointing Device Error) 1. Pointing Device 2. System Board 00012000 (Processor machine check) 1. Update BIOS 2. VRM 3. Replace microprocessor 00019501 (Microprocessor 1 is 1. Microprocessor 1 not functioning - check VRM and processor LEDs) 2. VRM 3. System Board 00019502 (Microprocessor 2 is 1. Microprocessor 2 not functioning - check VRM and processor LEDs) 2. VRM 3. System Board 00019701 (Microprocessor 1 failed BIST) 1. Microprocessor 1 2. System Board 00019702 (Microprocessor 2 failed BIST) 1. Microprocessor 2 2. System Board Symptom-to-FRU index 103
![](/manual_guide/products/ibm-8646-hardware-maintenance-manual-6b02ba6/111.png)