IBM 8646 Hardware Maintenance Manual - Page 108
Run Configuration/Setup
View all IBM 8646 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Error Code/Symptom FRU/Action 062 (Three consecutive boot failures using the default configuration.) 1. Run Configuration/Setup 2. Battery 3. System Board 4. Microprocessor 101, 102, 106 (System and microprocessor error) 1. System Board 111 (Channel check error) 1. Failing adapter 2. DIMM 3. System Board 114 (Adapter read-only memory error) 1. Failing adapter 2. Run diagnostics 129 (Internal cache error) 1. Microprocessor 2. Optional microprocessor (if installed) 151 (Real time clock error) 1. Run Diagnostics 2. Battery 3. System Board 161 (Real time clock battery error) 1. Run Configuration/Setup 2. Battery 3. System Board 162 (Device Configuration Error) Note: Be sure to load the default settings and any 1. Run Configuration/Setup 2. Battery 3. Failing Device additional desired settings; 4. System Board then, save the configura-tion. 163 (Real-Time Clock error) 1. Run Configuration/Setup 2. Battery 3. System Board 164 (Memory configuration changed, see ″Memory Settings″ on page 32.) 1. Run Configuration/Setup 2. DIMM 3. System Board 175 (Hardware error) 1. System Board 176, 177, 178 (Security hardware error) 1. Run Configuration/Setup 2. System Board 3. C2 Security Switch 184 (Power-on password corrupted) 1. Run Configuration/Setup 2. System Board 185 (Drive startup sequence information corrupted) 1. Run Configuration/Setup 2. System Board 186 (Security hardware control logic failed) 1. Run Configuration/Setup 2. System Board 100 Hardware Maintenance Manual: xSeries 220 Type 8646