IBM 8646 Hardware Maintenance Manual - Page 109
Run Configuration/Setup and Diagnostics
![]() |
View all IBM 8646 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Error Code/Symptom FRU/Action 187 (VPD serial number not 1. Set serial number in Setup set.) 2. System Board 188 (Bad EEPROM CRC #2) 1. Run Configuration/Setup 2. System Board 189 (Three attempts were made to access the server with invalid passwords) 1. Run Configuration/Setup, enter the administrator password 2. System Board. 201 (Memory test error, see ″Memory Settings″ on page 32.) If the server does not have the latest level of BIOS installed, update the BIOS to the latest level and run the diagnostic program again. 1. Run memory diagnostics. 2. DIMM 3. System Board 229 (Cache error) 1. Microprocessor 2. Optional microprocessor (if installed) 262 (DRAM parity configuration error) 1. Run Configuration/Setup 2. Battery 3. System Board 289 (DIMM has been disabled 1. Run Configuration/Setup, if disabled by user by user or system, see ″Memory Settings″ on page 2. Disabled DIMM, if not disabled by user. 32.) 301 (Keyboard or keyboard controller error) 1. Keyboard 2. System Board 303 (Keyboard controller error) 1. System Board 2. Keyboard 305 602 (Invalid diskette boot record) 1. Diskette 2. Diskette Drive 3. Cable 4. System Board 604 (Diskette drive error) 1. Run Configuration/Setup and Diagnostics 2. Diskette Drive 3. Drive Cable 4. System Board 605 (Unlock failure) 1. Diskette Drive 2. Drive cable 3. System Board 662 (Diskette drive configuration error) 1. Run Configuration/Setup and Diagnostics 2. Diskette Drive 3. Drive Cable 4. System Board Symptom-to-FRU index 101
![](/manual_guide/products/ibm-8646-hardware-maintenance-manual-6b02ba6/109.png)