IBM 8659-71Y Maintenance Manual - Page 110
Installing the Rack Model in a Rack, Enclosure
UPC - 087944526346
View all IBM 8659-71Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Installing the Rack Model in a Rack Enclosure: During this procedure, you must install parts on the rack enclosure and the server. This process can be divided into three parts: Preparing the server Preparing the rack enclosure Installing the server into the rack enclosure Before you begin Read "Safety Information" on page 174 and the safety information in your rack enclosure documentation. Turn off the server, if it is on. Refer to your rack enclosure documentation for additional information on preparing the rack. Preparing the Server: In this section, you will use the following parts: One cable arm bracket The inner slide from two slide bracket assemblies 6 pan-head short screws (M4 by 5 mm) 32 kg (70.5 lbs) 55 kg (121.2 lbs) Caution Use safe lifting practices when lifting your machine. Attention To avoid damage to internal components, use only the pan-head short screws (M4 by 5 mm) included with the Rack Mount Kit. 102 Netfinity Server HMM