IBM 8659-71Y Maintenance Manual - Page 153
System Board Removal/Replacement
![]() |
UPC - 087944526346
View all IBM 8659-71Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
System Board Removal/Replacement Before you begin Read "Safety Information" on page 174. If possible, before replacing the system board, record the server configuration. Turn off the server, if it is on. Attention If possible, save the existing system configuration or obtain a previously saved copy. After replacing system board, flash the system with the latest level BIOS match the BIOS level currently installed on the system. During the flash procedure you will be asked if the machine type and serial number information needs to be updated. Answer yes; then, manually enter the machine type ad serial number information. Use the Backspace key if necessary to enter the information. Some system functions rely on the accuracy the VDP information. To remove the system board, do the following: To replace the system, reverse the removal procedure. 1. Remove the side cover, card support bracket and retainer clip, see "Option Installation" on page 125. 2. Remove the rear fan assembly, see "Rear Fan Assembly Removal" on page 134. Netfinity 5000 - Type 8659 145
![](/manual_guide/products/ibm-865971y-maintenance-manual-737f5fc/153.png)