IBM 8659-71Y Maintenance Manual - Page 70
Start the Configuration/Setup Utility program
UPC - 087944526346
View all IBM 8659-71Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
To replace the battery: 1. Unplug the server. 2. Locate the battery on the system board (see "System Board Illustration" on page 142). 3. Remove the battery: a. Use one finger to lift the battery clip over the battery. b. Use one finger to slightly slide the battery toward the front of the server. The spring mechanism behind the battery will push it out toward you as you slide it forward. c. Use your thumb and index finger to pull the battery from under the battery clip. d. Ensure that the battery clip is touching the base of the battery socket by pressing gently on the clip. 4. Insert the new battery: a. Tilt the battery so that you can insert it into the front of the socket, under the battery clip. b. As you slide it under the battery clip, press the battery down into the socket. 5. Reinstall the server covers and complete the installation (see "Completing the Installation" on page 77). 6. Start the Configuration/Setup Utility program and reset configuration parameters as needed. To reset the system date and time, go to "Date and Time" on page 24. To reset the power-on password, go to "Using the Power-on Password Menu" on page 26. 62 Netfinity Server HMM