IBM 866011U Hardware Maintenance Manual - Page 101

Select the Devices and I/O Ports choice to view or change the assignments for devices and input/output ports. You can add serial ports by installing a serial adapter in an expansion slot. See the documentation that comes with the serial adapter for information about port assignments. You can configure the parallel port as bidirectional; that is, so that data can be both read from and written to a device. In bidirectional mode, the server supports Extended Capabilities Port (ECP) and Enhanced Parallel Port (EPP). To display or change the assignments for devices, serial ports, or the parallel port: 1. Select Devices and I/O Ports. 2. Select a device or port; use the Left Arrow (←) or Right Arrow (→) key to advance through the settings available. The Devices and I/O Ports choice appears only on the full Configuration/Setup Utility menu. Notes 1. When you configure the parallel port as bidirectional, use an IEEE 1284-compliant cable. The maximum length of the cable must not exceed 3 meters (9.8 feet). 2. The universal serial bus (USB) is configured automatically. For further details about Plug and Play devices, see "Plug and Play" on page 99. 3. If you install a USB keyboard that has a mouse port, the USB keyboard emulates a mouse and you will not be able to disable the mouse setting in the Configuration/Setup Utility. Date and time: Select this choice to set the system date and time. The system time is in a 24-hour format: hour:minute:second. The system date is in standard format for your country. For example, in the United States, the format is MM/DD/YYYY (Month/Day/Year). Select Date and Time; then, use the Left Arrow (←) or Right Arrow (→) key to advance through each data field. Type the new information; the system saves the information as you type it. The Date and Time choice appears only on the full Configuration/Setup Utility menu. Netfinity 5500 - Type 8660 93