IBM 866011U Hardware Maintenance Manual - Page 76
System Power menu selections, Disconnect, Current Logon
UPC - 087944414216
View all IBM 866011U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Menu Selection Service Processor Configuration System Services System Power Data Available for Viewing System management processor modem configuration, dial-out entries, dial-out alerts, dial-in logins, system status, thresholds, system statistics, VPD information and system state Status of system management processor watchdog timers and event alerts sent to the server Current system power status, power-off configuration and power-off delay values. Note You can use selections available from the System Power menu to power the system on or off. For more information, see "System Power menu selections" on page 68. Boot Remote Terminal Status Start Remote Video You can use selections available from the Boot menu to shutdown and restart the system or to restart the system management processor. For more information, see "Boot menu selections" on page 69. Current remote terminal status Use Start Remote Video to enable the terminal program to remotely monitor and manage the server during POST. For more information, see "Using remote video mode to monitor and access POST" on page 71. When you are finished accessing the system management processor using a terminal program, select Disconnect Current Logon from the main menu and then use the terminal program to close the connection to the system management processor. System Power menu selections: You can use the selections available from the System Power menu to: View data regarding the current server power status View data regarding the server power configuration Power the server off Power the server on To access these functions: 1. Use a terminal program to establish a connection with the system management processor modem. 2. Log in to the system management processor. When you have established a connection with the system management processor, you will be prompted for a username and password. You must provide a username and password combination that has been previously configured for use with the system management processor. You can use one of two username and password combinations: 68 Netfinity Server HMM