IBM 866011U Hardware Maintenance Manual - Page 27

- Microsoft Windows NT Server Utility - Novell NetWare/Intranetware Server Utility - SCO OpenServer Utility You can obtain updates to the installation instructions for the ServeRAID utility programs from the World Wide Web. See "Online support" on page iv. Before you begin Be sure that the ServeRAID controller is configured properly. Be sure that the network operating system is installed and functional. If you are using Microsoft Windows NT, you can use the Administration and Monitoring utility program in the client/server mode (across the network) or in the stand-alone mode (at the server). - See "Installing the Server Utility Programs" on page 20 for client/server mode instructions. - See "Installing the Administration and Monitoring Utility Programs using diskettes" on page 25 for stand-alone mode instructions. If you are using OS/2, NetWare/IntraNetware, or SCO OpenServer, you must use the Administration and Monitoring utility program in the client/server mode. Requirements for this environment include: - A Windows NT or Windows 95 client running the IBM ServeRAID Administration and Monitoring utility program - A network adapter or controller with proper cabling for access to the client system - The TCP/IP networking protocol installed on both the server and client systems - The IBM ServeRAID Administration and Monitoring Server utility program installed on the client system - See "Installing the Server Utility Programs using Diskettes" on page 20 to install the server utility program. - See "Installing the Administration and Monitoring Utility Programs using diskettes" on page 25 to install the Administration and Monitoring utility program on a Windows 95 or Windows NT system. Netfinity 5500 - Type 8660 19