IBM 866011U Hardware Maintenance Manual - Page 35

The following illustration is an example of the screen that appears. IBM ServeRAID Administration and Monitor 1 Options Advanced Help 2 STOP 3 Channel 1 Channel 2 Adapter 1 Log Drv 0 Log Drv 1 ONL B ONL B ONL A ONL A Log Drv 2 ONL B ONL A 8 Log Drv 3 DHS SHS RDY HSP RDY 4 7 06/09/97 11:25:14 Adapter 1: dead drive detected Channel=2, Bay=4 6 5 Connected to local host 06/09/97 12:25:30 Descriptions of the labeled areas are as follows: 1. Title Bar Displays the title of the application, along with the minimize icon, the maximize icon, and the close icon. 2. Menu Bar Displays the pull-down menus for all supported functions. 3. Tool Bar Displays the icons for the commonly used functions. 4. Device Area Displays information for each device connected to the physical channel of the ServeRAID controller. This includes the device states and the array identifiers, if applicable. 5. Status Bar Displays help for the area where the cursor is currently pointing. The date and time are also displayed. 6. Status Window Displays messages regarding the operational status of each ServeRAID controller. 7. Logical Drive Area Displays the number of logical drives that you created and the status of each logical drive. 8. Adapter Area Displays the number of ServeRAID controllers installed in the server and the status of each ServeRAID controller. Options pull-down menu: This section provides information about the following three choices available from the Options pull-down menu on the main screen of the Administration and Monitoring utility: Network Settings General Options Netfinity 5500 - Type 8660 27