IBM 866011U Hardware Maintenance Manual - Page 227
included in the microprocessor kit in the secondary, VRM connector
![]() |
UPC - 087944414216
View all IBM 866011U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
b. Center the microprocessor 6 over the secondary connector 4 . Attention Make sure the microprocessor is oriented and aligned correctly before you try to press it into the connector. c. Press in on the latches 7 and carefully insert the microprocessor into the connector. d. Press outward on the latches 7 to lock the microprocessor in place. Note To remove the microprocessor, press in on the latches 7 and lift the microprocessor out of the connector. 4. Install the voltage regulator module (VRM) 1 included in the microprocessor kit in the secondary VRM connector 8 . Note If you remove the secondary microprocessor at some time in the future, remember to install the terminator card in the secondary microprocessor connector and to remove the VRM for the secondary microprocessor. 5. If you have other options to install or remove, do so now; otherwise, go to "Completing the installation" on page 154. Netfinity 5500 - Type 8660 219
![](/manual_guide/products/ibm-866011u-hardware-maintenance-manual-12f5559/227.png)