IBM 866441Y Hardware Maintenance Manual - Page 146
and DC Power, open position, and slide the power supply into
![]() |
UPC - 087944522201
View all IBM 866441Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Caution The following label indicates a hot surface nearby. b. Remove the defective power supply by placing the handle 5 on the power supply in the open position (perpendicular to the power supply) and pulling the power supply from the bay. 3. If you are not replacing the power supply: a. Install a power-supply filler panel 2 . Note During normal operation, each power-supply bay must have either a power supply or filler panel installed for proper cooling. b. Open the cable-restraint bracket 3 and remove the power cord from the cable-restraint bracket. Close the cable-restraint bracket. c. Unplug the power cord from the electrical outlet. If you are replacing the power supply: a. Place the handle 5 on the power supply in the open position, and slide the power supply into the chassis. b. Gently close the handle on the power supply to seat the power supply in the bay. c. Plug the power cord for the power supply into the power cord connector 4 . d. Verify that the AC Power light 6 and DC Power light 7 are lit, indicating that the power supply is operating correctly. 4. If you have other options to install or remove, do so now; otherwise, go to "Completing the installation" on page 141. 138 Netfinity Server HMM
![](/manual_guide/products/ibm-86644ry-hardware-maintenance-manual-70136a6/146.png)